Dollbot

I bought a Dollbot body and the L-bust. Due to the body not including a head and the head being unavailable separately, I had to use a non-Dollbot head to pair with the body. I decided to use the Dollce C-type head.

Faceup on Parabox Gretel

I acquired the Gretel head from Parabox. Faceup time!

I didn't have a specific character in mind when doing her faceup. I was just happy to be able to work on a head which isn't a Volks head for a change.

I'm not sure what kind of body to get for her. Parabox uses an Obitsu 60cm body with her but the Obitsu 60cm body downright sucks. Obitsu 50cm bodies are far better but I would like to swap out the skin parts with Dolly Pop! parts. Too bad buying Dolly Pop! parts from North America is very difficult. I can probably forget about getting an AZO2 body by itself unless I go to Japan again. Nameless girl will be a floating head for now.

After getting her body, I'll likely get her a different wig and an outfit.

FrankenDollfie version 4 | フランケンドルフィー其の四

以前、フランケンドルフィーの背骨バージョン３をダイナマイトボディに入れて
セクシーな太ももの改造をしたが軸が短すぎで太ももが外れるだけだった。
使ったオビツパーツの軸とDD3のフレームの軸を比較すればオビツの方が短い。
ダイナマイトの外皮も結構大きいので 短い軸では太ももが外れやすい。
設計上、下半身ボディのせいで柔軟性も無い。
(DD3も柔軟性は無いけどね。)

I previously tried to use a FrankenDollfie version 3 spine into a DDdy. If I implemented the Sexy Legs mod, the pegs holding the thighs together were too short and the thighs dislodged. If you were to make a comparison between the Obitsu part and a DD part, the peg for the Obitsu part is shorter. DDdy's outer skin is so voluminous, having a shorter peg will make the thighs dislodge easily. The torso is also inflexible because of the outer skin design. (The inflexible torso part is true for DD3 as well.)

そこで誰かがもう切り込みを入れたダイナマイトの下半身ボディを購入した。
もっと切り込んだらどうなる？

I then came across this DDdy part and bought it. Since someone cut into it already, what if I cut it some more?

FrankenMiku

The above photo has a bunch of Volks, Obitsu, Parabox, and miscellaneous parts.

My Daughter Can Kick Your Daughter's Head Off

I hadn't uploaded anything in a while so this blog was somewhat neglected. While I did finish a few other minor projects concerning dolls, I didn't feel like going through the trouble of taking photos and posting them. (Considering I can count on one hand how many people read this blog as of this writing, you might understand why.)

Since I was taking photos at the time for different reasons, I decided to take some of Platina and the highly customized body she's currently using. Her outer skin is 90+% Volks. Her innards are a combination of Volks, Obitsu, Parabox Toy Skeleton, brass pipes, plastic pipes, screws, nuts, and miscellaneous parts.

Custom Neck Piece Prototype

If you own some version of a Dollfie Dream III or Sister, you might recognize this part as the chest and neck frame. I decided to run an experiment for increasing the movement range by putting together a custom neck joint.